QRPGuys 61dB Step Attenuator – $30 Available soon
Based on an ARRL design, the QRPGuys 61dB Step Attenuator allows you scale back the output of your qrp transmitter to lower levels. It incorporates seven pi-network resistive networks. You can easily attenuate your low power rig to pursue your “Miles/Watt” goal. With our attenuator you can have 1 dB steps throughout the range. Ours also has a bypass switch that you can easily throw and not attenuate in receive mode, without having to return all the switches to bypass. Our design can be used as is, or allows mounting the BNC connectors and resistors on the back side to permit mounting in a chassis if you desire. With our use of 3W resistors you can safely use 5 watts cw figuring a 50% duty cycle. The kit is all contained on a 6.12″ x 2.00″ pcb, and has female BNC connections. On a difficulty scale of 1 to 5, 5 being the most difficult, this is rated at 2.